FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Alarm | en
39
Bosch Sicherheitssysteme GmbH
User Guide
2020-07 | 3.0 | F.01U.378.877
Notice!
Depending on the configuration of the system, either the logical or physical address of the
detector is displayed.
Message number
For information on the message number (#002), see Information about logical zones in the
alarm state.
Depending on the configuration, additional information is displayed in the second line, such as
the installation location of the detector or the detector type.
To display more information about an alarm message, see Displaying additional information.
8.4.8
Displaying additional information
Notice!
By way of example, an action text can be entered for every detector type in the FSP-5000-RPS
programming software.
To display further information about the individual detectors, select the alarm message you
require.
The following information is displayed:
–
Element category
–
Message type
–
Date and time of the message
–
Physical and logical addressing of the detector
–
Only for LSN detectors: specification of the detector type
–
Action text (depending on the configuration)
