Bosch ATMO Station Assembly Download Page 8

Page: 8 / 62

Safety measu

res

Page 3 / 10

EPA assembly line for DaeP

Assembly Station

VPP 21

Station x

Station 2

Station 3

Station 4

Station 5

Station 6

Station 7

Station 8

Station 9

Station 10

Station 11

Station 12

Station 13

Station 14

Station 15

Station 16

Station 17

Station 18

Station 19

Station 20

Station 21

Station 22

Station 23

Station 24

Station 25

Station 26

Station 27

Station 28

Station 29

Station 30

Station 31

Station 32

Station 33

Station 34

Station 35

Station 36

Station 37

Station 38

Station 39

Station 40

Station 50

Station 60

Station 70

Station 80

Station 90

Station 100

Station 110

Station 120

Station 130

Station 140

Station 150

Station 160

Station 170

Station 180

Station 190

Station 200

Station 210

Station 220

Station 230

Station 240

Station 250

Station 260

Station 270

M.3000314.190_0843.195.960 /

V0.0_0613_EN_PA--ATMO2



Robert Bosch GmbH

Intended use

Residual risks

Danger notice

The line is constructed in accordance with the state of the art and is

operationally safe. However, if used improperly, dangers for the user or third

parties and impairments to the machine and other property can still be

caused.

The following residual risks remain despite all precautions:

Notice!

Installation, startup and maintenance must be carried out as described in

this manual. This is also part of a Intended use of the machine according to

the regulations.

DANGER!

In manual mode it is possible to bypass certain guard doors by way of the

key--operated switch. Due to this, machine movements can be executed

when the guard doors are open.
While doing so there is a risk of injury!
Only authorized persons are allowed to bypass the guard doors. These

persons must be familiar with the machine sequence and must be familiar

with the possible dangers. In manual mode the machine must be operated

by one person only.

WARNING!

The line has rotating machine parts.

Unbound long hair, loose clothes, jewelry etc. can be caught and drawn in

by rotating machine parts. This can cause severe injuries.

Wear close fitting clothes. Protect long hair with a hair net.

WARNING!

In the event of an emergency stop the compressed air supply is not

switched off.

Prior to accessing the pneumatic system, render the pneumatic system

unpressurized using the hand valve provided at the respective station.

Summary of Contents for ATMO Station































































Search results

Summary of Contents for ATMO Station

Reviews:

Related manuals for ATMO Station

Brands by name

Popular brands

Bosch ATMO Station, Assembly

Search results

Summary of Contents for ATMO Station

Reviews:

Related manuals for ATMO Station

Brands by name

Popular brands