5
6
Function buttons
TIMER ON Button
TIMER OFF Button
8
Push this button to decrease setting temper-
ature or to decrease Hour during Timer setting.
UP Button( )
Push this button to increase setting temper-
ature or to increase Hour during Timer setting.
DOWN Button( )
9
-
+
12
13
10
11
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN SPEED Button
SILENCE/FP Button
Press this button to initiate the auto-on time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-on time to 0.0.
Press this button to initiate the auto-off time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-off time to 0.0.
14
15
LOCK Button
When you press the recessed LOCK button,
all current settings are locked in and the
remote controller does not accept any
operation except that of the LOCK. Press
again to cancel the LOCK mode.
LED/FOLLOW ME Button
(Follow ME button
is not available for RG36F7/BGE)
Disable/Active indoor screen Display. When
pushing more than 2 seconds, the FOLLOW
ME function will be activated, pushing more
than 2 seconds again to disable.
,
,
7
When you press the recessed RESET button,
all current settings are cancelled and the
control will return to the initial settings.
RESET Button:
1
1
2
2
4
4
5
5
3
3
9
9
10
10
8
8
6
6
7
7
11
11
12
12
13
13
14
14
15
15
TURBO
SELF
CLEAN
TURBO
SELF
CLEAN
SLEEP
SLEEP
SILENCE
FP
SILENCE
FP
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
LOCK
LOCK
RESET
RESET
LED
FOLLOW
ME
LED
FOLLOW
ME
FAN
SPEED
FAN
SPEED
SWING
SWING
MODE
MODE
TEMP
TEMP
ON/OFF
ON/OFF
DIRECT
DIRECT
NOTE:
Follow ME button is not
available for model
RG36F7/BGE.
Active/Disable SILENCE function.
When the Silence function is activated, the
compressor will operate at low frequency and
the indoor unit will bring faint breeze, which will
reduce the noise to the lowest level and create
a quiet and comfortable room for you. Due to
low frequency operation of compressor, it may
result in insufficient cooling and heating capacity.
During the heating operation(only when the
setting mode is HEAT),If pushing this button
more than 2 seconds, the FP function is
activated. The unit will operate at high fan
speed with the temperature automatically
O
set to 8
C.
The display window of indoor unit
will display FP . For the unit without display
area, the Defrost indicator light will be
keeping on for 2 seconds, and then be off for
2 seconds by turns. Press ON/OFF,SLEEP,
FP, MODE, FAN SPEED, UP, DOWN button
while operating will cancel the FP function.
,
,
,
,
,
,
,
,
Summary of Contents for ASI09AW30
Page 2: ......
