Bosch ARD-AYBS6 0 MIFARE Series, Safety Instructions And Technical Manual

Page: 5 / 24

LECTUS duo 3000 Safety Instructions | en 5
Bosch Access Systems GmbH Technical manual | V 1.2 | 2013.12
Safety Instructions
1. Read, follow, and retain instructions - All safety and
operating instructions must be read and followed properly
before putting the unit into operation. Retain instructions
for future reference.
2. Do not ignore warnings - Adhere to all warnings on the
unit and in the operating instructions.
3. Power sources - Operate the unit only from the type of
power source indicated on the label. If unsure of the type
of power supply to use, contact your dealer.
WARNING!
Risk of damage to equipment!
- Always switch off power of the device before modifying the
installation.
- Do not connect or disconnect plug connectors, data cables
or screw connectors while power is on!
WARNING!
Health and Safety!
Installation of the device must comply with any local fire, health
and safety regulations. A secured door that may be part of an
escape route from an area must be installed with:
- A fail-safe lock (A). So that the door will be released if
power fails. Ideally, a magnetic lock should be used.
- A normally-closed break-glass or manual pull (B) in the lock
supply wiring, so that in an emergency the fail-safe lock
can be immediately powered down.
WARNING!
Risk of damage!
Protect the hardware from electrostatic discharge by observing
ESD instructions before unpacking or touching connectors or
electronics.