How to use the buttons
Climate 5000 – 6 720 866 393 (2019/11)
9
Dehumidifying operation
Ensure the power supply is on and all interconnecting wires are
connected. The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1
Press the MODE button to select DRY mode.
2
Press the UP/DOWN buttons to set the desired
temperature.
The temperature can be set within a range of
17
º
C~ 30
º
C in 1
º
C increments.
3
Press the ON/OFF button to start the air conditioner.
NOTE
In the Dehumidifying mode, you can not switch the fan
speed. It is automatically controlled.
Adjusting air flow direction
Use the SWING
& button to adjust the desired airflow
direction.
1
Up/Down direction can be adjusted with the button on
the remote controller. Each time when you press the
button, the louvre moves an angle of 6 degree. If pressing
more than 2 seconds, the louver will swing up and down
automatically.
2
Left/Right direction can be adjusted with the
button
on the remote controller. Each time when you press the
button, the louver moves an angle of 6 degree. If pressing
more than 2 seconds, the louvre will swing up and down
automatically.
NOTE: When the louvre swing or move to a position which would
affect the cooling or heating effect of the air conditioner, it
would automatically change the swing/moving direction.
