manualshive.com logo in svg

Bosch AMAX panel 2100, User Manual

Share
Download
Bosch AMAX panel 2100 User Manual Download Page 36

Domestic Dialing

Domestic Dialing Alarm

When a zone tamper or zone alarm is activated, the control
panel can dial a phone number of a contact person through the
onboard voice dialer module. A maximum of four numbers can
be dialed by the control panel during an alarm.

Indication of Domestic Call Alarm:
Domestic call 1 (1 alarm tone or recorded voice message)
Domestic call 2 (2 alarm tone or recorded voice message)
Domestic call 3 (3 alarm tone or recorded voice message)
Domestic call 4 (4 alarm tone or recorded voice message)
 
The voice messages are recorded with A-Link Plus and are
transferred via A-Link Plus to the AMAX panel.
Please contact your installer to enable/disable this function.
 

Confirming the Domestic Call

All alarm events need acknowledgement. The transmission
sequence is repeated until the control panel receives an
acknowledgement tone. The control panel automatically closes
the line after 45 seconds if it can not detect the
acknowledgement tone and redial later.

4

Press [#] between two acknowledgement tones to confirm
the alarm.

P

The system beeps for two seconds and closes the line.

 

11

11.1

11.2

36

en | Domestic Dialing

AMAX panel

2015.05 | 04 | F.01U.295.569

Bosch Sicherheitsysteme GmbH

Summary of Contents for AMAX panel 2100

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands