System test
Siren test
This function allows the users to test the siren.
4
Enter your code + [4] [1] and press [#].
P
The system beeps twice and the siren is activated for one
second.
Communication test
This function allows the users to send a test report to a central
monitoring station.
1.
Enter your code + [4] [2] and press [#].
The system beeps twice and a test report is send.
The keypad displays the status of the test report for all
communication paths.
2.
Press [#] to exit.
Walk test mode
This function allows users to test detection devices to ensure
they are functioning correctly. Bypass any zones that are not
required for testing before activating the walk test mode.
During the walk test, no walk test report is sent out to the
control panel system.
How to select walk test mode
1.
Enter your code + [4] [3] and press [#].
The system beeps twice and the STAY and AWAY indicators
flash.
2.
Unseal and seal the zones to be tested.
P
The system beeps. The siren beeps once each time a zone
status is changed.
How to exit walk test mode
4
Enter your code + [4] [3] and press [#].
6
6.1
6.2
6.3
28
en | System test
AMAX panel
2017.04 | 07 | F.01U.295.569
Bosch Sicherheitssysteme GmbH
