Bosch 8 OptiMUM Series, Information For Use

Page: 33 / 176

operation en
33
ope r a tion
7 Basic operation
ope r a tion
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1.
Pull the power cable out to the re-
quired length.
2.
To shorten the cable, push it into
the cable storage compartment.
7.2 Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Posi-
tion
Use
Posi-
tion 1
Swivel arm is closed.
¡
Process ingredients with
tools.
¡
Use accessory on main
drive, e.g. Meat mincer.
¡
Use accessory on drive
2, e.g. Continuous feed
shredder
¡
Use accessory on drive
3, e.g. Glass blender at-
tachment
Posi-
tion 2
Swivel arm is open.
¡
Insert or remove bowl.
¡
Attach or remove lid.
¡
Insert or remove tool.
¡
Add the ingredients to
the bowl.
7.3 Opening swivel arm
▶ Press the release button and raise
the swivel arm until it engages.
→
Fig.
5
a
The swivel arm is fixed in posi-
tion 2.
7.4 Closing swivel arm
▶
Press the release button and push
the swivel arm down until it en-
gages.
→
Fig.
6
a
The swivel arm is fixed in posi-
tion 1.
7.5 Removing bowl
▶
Turn the bowl clockwise and re-
move.
→ Fig. 7
7.6 Inserting bowl
1.
Place the bowl in the base unit.
→
Fig.
8
Use the recesses on the base unit.
2.
Turn the bowl anticlockwise until it
engages.
→ Fig. 9
7.7 Attaching bowl lid
Requirement: No tool is used here.
▶
Fit the lid onto the main drive until
it engages.
→ Fig. 10
The filling shaft must face towards
the front.
7.8 Removing bowl lid
Requirement: No tool is used here.
▶ Take the cover off the main drive.
7.9 Inserting tools
1.
Select the tool required.
→
"Overview of tools", Page 31
2.
Press the tool into the main drive
until it engages.
→ Fig.
11
The protective cap must cover
the main drive completely.