manualshive.com logo in svg

Bosch 3 601 K69 J11, Operating/Safety Instructions Manual

Share
Download
Bosch 3 601 K69 J11 Operating/Safety Instructions Manual Download Page 4

-4-

General Safety Rules

Read all instructions.

 Failure to follow all 

instructions listed below may result in electric 

shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

Work area safety

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

DO NOT operate the laser tool around children or allow chil-
dren to operate the laser tool.

 Serious eye injury could result.

Electrical safety

Batteries can explode or leak, cause injury or 
fire. To reduce this risk, always follow all 

instructions and warnings on the battery label and package.

Safety Symbols

The definitions below describe the level of severity for each signal 
word. Please read the manual and pay attention to these symbols.

This is the safety alert symbol. It is used to 
alert you to potential personal injury hazards. 
Obey all safety messages that follow this 
symbol to avoid possible injury or death.

Read manual symbol - Alerts user to read 
manual.

WARNING indicates a hazardous situation 
which, if not avoided, could result in death or 
serious injury.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 3 601 K69 J11
















Reviews:

No comments

Brands by name

Popular brands

Load more brands