Bosch 3 601 JC3 060, Original Instructions Manual

Page: 19 / 251

English | 19
(10) Wheel
(11) Castor brake
(12) Castor
(13) Cable holder
(14) Closing flap for filter cover
(15) Holder for suction tubes
(16) Holder for crevice nozzle/curved nozzle
(17) Holder for floor nozzle
(18) SFC+ switch
(19) Dust extraction adapter
(20) SFC+ module
(21) Vacuum hose
(22) Curved nozzle
(23) Disposal bag
(24) Flat-pleated filter (cellulose)
(25) Crevice nozzle
(26) Rubber lip
(27) Brush inserts
(28) Floor nozzle
(29) Suction tube
(30) Adapter for vacuum hose holder
(31) Snap fastener
(32) False air intake
(33) Filter cleaning actuator
(34) Filter cover
(35) Fill level sensors
Technical data
Wet/dry dust extractor GAS 35 L SFC+
Article number 3 601 JC3 0..
Rated power input W 1200
Frequency Hz 50−60
Container volume (gross) l 35
Net volume (liquid) l 19
Dust bag volume l 19
Max. vacuum
A)
– Dust extractor hPa 230
– Turbine hPa 254
Max. volume flow rate
A)
– Dust extractor l/s
m³/s
36
0.036
– Turbine l/s
m³/s
74
0.074
Max. suction power W 1380
Area of pleated filter m² 0.615
Dust class L
Wet/dry dust extractor GAS 35 L SFC+
Weight according to EPTA-Pro-
cedure 01:2014 kg 11.6
Protection class /I
Dust extractor protection rating IPX4
Mains plug Switzerland protec-
tion rating IP55
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
Rated voltage Maximum power Minimum power
230 V 2200 W 100 W
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take
note of the information on the socket of the dust extractor.
Noise/Vibration Information
Noise emission values determined according to
EN 60335-2-69 .
Typically the A-weighted sound pressure level of the dust ex-
tractor is
70 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335-2-69 : a
h
< 2,5 m/s
2
,
K = 1,5 m/s
2
.
Assembly
u
Pull the plug out of the socket before cleaning or per-
forming maintenance on the vacuum cleaner, making
tool adjustments, changing accessories or putting
away the vacuum cleaner.
This safety measure prevents
the vacuum cleaner from being started accidentally.
Fitting the holder for the vacuum hose (see
figure A)
– Slide the holder (4) for the vacuum hose firmly into the
corresponding adapters (30) from above until they click
into place.
Fitting the vacuum hose (see figure B)
– Attach the vacuum hose (21) to the hose adapter (2) and
turn it clockwise as far as it will go.
Note: The friction generated by the dust in the vacuum hose
and accessory during extraction causes an electrostatic
charge that the user may experience as static discharge (de-
pending on environmental factors and their physiological
state).
Bosch generally recommends using an anti-static vacuum
hose (accessory) to vacuum up fine dust and dry materials.
Bosch Power Tools 1 609 92A 7Z7 | (23.06.2022)