SCD110 Operating Instructions v2.0
19 | 27
Data subject not change without notice | Printed in Germany | September 20 | Version 1.0
BCDS/GM
Note
The downloading process may take several minutes. Logging must be stopped in order to proceed
with the download.
Note
Please note that SCD can log only one axis (z-axis) in 6.4 kHz sampling rate. Logging 3-axis in this
speed is not possible. With all the other sampling rate options 3-axis data is saved.
Note
Please use the raw-data from the logging function in the data analysis. This data is recorded directly in
the embedded device (SCD), and transferred later. In this way, it is possible to save the data in high
sampling rates. Please don’t use the recorded data in Diagram view which is aggregated to reduce the
data volume in streaming.
5.9
Removing the SCD
5.10
Reusing the SCD
After the SCD has been removed, it can be reused. For mounting, proceed as described in 5.1 Mounting the
SCD. Please note that after removal the IP67 certification is no longer guaranteed.
INFO: IP67 certification can no longer be guaranteed after removal.
INFO: Do not use any sharp objects to remove the SCD.
TIP:
The machine temperature should be below 40 °C.
Run a flat tool without a
sharp edge between the
SCD and the surface.
Carefully lift the SCD and
release it from the machine
surface.
