![Bosch 21-17-3234 Translation Of Original Operating Instructions Download Page 114](http://html.mh-extra.com/html/bosch/21-17-3234/21-17-3234_translation-of-original-operating-instructions_19108114.webp)
MY22Z01 - 12_1.0_25.07.2022
113
Operation
6.5.10 Suspension
A pedelec’s fork suspension and rear frame
damper suspension can be adjusted to the rider's
weight in up to six increments, depending on the
suspension system.
Follow the correct order for adjustment.
6.5.11 Fork sag
Adjustments on the chassis change ride
performance significantly. The rider needs to get
used to the pedelec and break it in to prevent
accidents.
The sag depends on the position and body weight
and should be between 10% and 30% of the
maximum fork deflection, depending on
preferences and on how the pedelec is used.
Greater sag (20% to 30%)
A greater sag increases sensitivity to bumps, thus
producing greater suspension motion. A greater
sensitivity to bumps ensures more comfortable
ride performance and is used on pedelecs with a
longer deflection.
Decreased sag (10% to 20%)
A decreased sag reduces sensitivity to bumps,
thus producing less suspension motion. A lower
sensitivity to bumps ensures a firmer, more
efficient ride performance and is generally used
on pedelecs with a shorter deflection.
The adjustment shown here represents a basic
setting. Pedelec riders should change the basic
setting to suit the surface and their preferences.
It is advisable to make a note of the basic settings.
These can then be used a starting point for
subsequent settings and as a safeguard against
unintentional changes.
All suspension components (rigid and
suspension forks and rear frame dampers) are
parts which may be replaced after approval by
the vehicle or part manufacturer.
§
For pedelecs with components only
Sequence
Adjustment
Section
Suspension fork
Rear frame damper
1
Adjust the suspension fork sag
x
2
Adjust the rear frame damper sag
x
3
Adjust suspension fork rebound damper
x
4
Adjust rear frame damper rebound damper
x
5
Adjust the rear frame damper compression adjuster
x
6
The fork compression adjuster is adjusted to the terrain
while riding.
Table 46: Order for adjusting the suspension
Crash caused by incorrectly set suspension
If the suspension is set incorrectly, the fork may
become damaged, meaning problems may occur
when steering. This will cause a crash with
injuries.
Never ride without air in the air suspension
fork.
Only use the pedelec if the suspension fork is
adjusted to the rider’s body weight.
CAUTION
!
Summary of Contents for 21-17-3234
