manualshive.com logo in svg

Bosch 21-17-3234, Translation Of Original Operating Instructions

Share
Download
Bosch 21-17-3234 Translation Of Original Operating Instructions Download Page 37

MY22Z01 - 12_1.0_25.07.2022

36

Description

Bead core

Tyre carcasses are wrapped around bead cores. 
Wrapping the carcass around both sides creates 
three carcass plies.

To ensure that tyres do not slip when inflated on 
the rim and have an effective grip, the bead cores 
are stabilised in two different ways:

Figure 19: Steel bead core (1) and Kevlar bead core (2)

• with a steel wire. These tyres are called clinchers.
• With aramid fibres (Kevlar®). These tyres are 

called folding tyres. Folding tyres are about 50-
90 g lighter than clinchers. It can also be folded 
into a smaller pack size.

Puncture protection belt 

There may be a puncture protection belt between 
the carcass and the tread. 

Figure 20: Effect of puncture protection belt

Each tyre manufacturer has its own puncture 
protection classes which are not on par with one 
another.

1

2

Summary of Contents for 21-17-3234







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands