The AutoDome 200 Series has advanced, built-in
diagnostics to simplify service and minimize
downtime. Using the On Screen Display (OSD), a
technician can quickly and easily check critical
parameters (such as internal temperature and input
voltage level) to verify that the dome is functioning
within acceptable operating limits. If video is not
present, a local inspection of three diagnostic LEDs at
the camera site can identify the presence of video and
control data.
Feature Comparison Matrix
The following table provides an overview of the
AutoDome camera family and its available features:
Preset Shots
64
99 99
High Speed PTZ
Interchangeable Modules
Day/Night Operation
High Resolution Camera
Alarm Inputs
7/4 7/4
Guard Tour
SensUp Extended Sensitivity
IR Sensitive
Cable Compensation
Bilinx Remote Configuration*
Hybrid Analog/IP Connectivity
UTP/Coax Transmission
Ruggedized, Vandal-Resistant Enclosure
Hot-Swap Camera Modules
Image Stabilization
Video Motion Detection
AutoTrack II Motion Tracking
Advanced Features
Advanced Alarm Control
Privacy Masking and Sector Blanking
AutoDome
100 Series
AutoDome
200 Series
AutoDome
300 Series
AutoDome
500i Series
Standard Features
Preset Tour
*Compatible over Coax and UTP transmission only. Remote configuration over IP via web
interface.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations, including EN50130-4 and
EN50121-4
Product Safety
Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Region
Certification
Europe
CE
EMC Directive, Low-Voltage Directive
Installation/configuration notes
Ordering Guide
1 Video Format
6 Power
5
1 PTZ PAL
0 24 VAC
1
2 PTZ NTSC
1 120 VAC
2 Camera Type
2 230 VAC
1 18x Color PTZ
7 Mount
3 Enclosure
W Wall
C In-ceiling
2
M Mast
P Indoor Pendant
C Corner
E Outdoor Pendant
R Roof
4
4 Bubble
P Pipe
C Clear Rugged
8 Fiber Optics
T Tinted Rugged
_
No Fiber
5 Communications
F Fiber
3
S Standard Analog (Coax/
UTP)
E Ethernet (TCP/IP)
1 No transformer included. Customer must supply an approved 24 VAC limited power
supply (VG4-A-PSUx or equivalent).
2 Recessed in-ceiling housing units do not require kit options for reference numbers 6, 7,
or 8.
3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the system.
4 Roof mount mounts to vertical Parapet. For flat roof installation, order an additional
LTC 9230/01 Flat Roof Adapter Plate.
5 Optional trim skirt available as a separate purchase.
Technical specifications
Camera 18x Color
Imager
1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens
18x Zoom (4.1–73.8 mm)
F1.4 to F3.0
3 | AutoDome 200 Series PTZ Camera System
