Bosch 2-50 C, Original Instructions Manual

Page: 14 / 20

24 | English
1 609 92A 2U5 | (27.2.17) Bosch Power Tools
Working with Automatic Levelling
Working without Automatic Levelling
Remote Control via
Bluetooth
®
The measuring tool is equipped with a
Bluetooth
® module
which uses radio technology to enable remote control via a
smartphone with a
Bluetooth
® interface.
For information on the necessary system requirements for a
Bluetooth
® connection, please refer to the Bosch website at
www.bosch-pt.com
When remote controlling by means of
Bluetooth
®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
Bosch applications (apps) are available for remote control-
ling. They can be downloaded in the respective stores, de-
pending on the terminal/device:
Switching On
Bluetooth
®
To switch on
Bluetooth
®, press the
Bluetooth
® button 3 . En-
sure that the
Bluetooth
® interface is activated on your mobile
terminal/device.
After starting the Bosch application, the connection between
the mobile terminal/device and the measuring tool is estab-
lished. When several active measuring tools are found, select
the appropriate measuring tool. When only one active mea-
suring tool is found, the connection is automatically estab-
lished.
The connection is established as soon as the
Bluetooth
® indi-
cator 2 lights up.
The
Bluetooth
® connection may be interrupted if there is too
much distance or there are obstacles between measuring tool
and mobile terminal/device and if there are any electromag-
netic interference sources. In this case, the
Bluetooth
® indica-
tor flashes.
Switching Off
Bluetooth
®
To switch off
Bluetooth
®, press the
Bluetooth
® button 3 or
switch off the measuring tool.
Horizontal line
operation
Vertical line
operation
Point
operation
Indicator 5 for working
without automatic levelling
Figure
On/Off switch 18 in position
“ ”
  
B1
Cross-line operation
Press 1 time

– – C1
Press 2 times –

– D1
Press 3 times – –

E1
Press 4 times
  
B1
Cross-line operation
Horizontal line
operation
Vertical line
operation
Point
operation
Indicator 5 for working
without automatic levelling
Figure
On/Off switch 18 in position
“ ”
 
–
red F1
Cross-line operation
Press 1 time

– – red
Press 2 times –

– red
Press 3 times
 
–
red F1
Cross-line operation
Laser
Laser
Laser
Laser
Laser
Laser
Laser
OBJ_BUCH-2870-004.book Page 24 Monday, February 27, 2017 3:47 PM