Display and operating elements
3–2
1070 073 826-101 (01.10) GB
To change display resolutions, switches 1 through 8 on the externally acces-
sible S1 DIP switch can be set as follows:
D
1024 x 768 pixels
1
2
3
4
5
6
7
8
OFF
ON
S1
(IPC300)
(factory setting
in IPC300)
3.2
Touch screen controller
All control panels are supplied with a touch screen controller. The touch
screen facilitates manual operation via the touch sensitive display surface,
and replaces the mouse. The calibration of the touch screen takes place with
the help of software on the IPC300.
The touch screen controller functions are communicated via the dedicated
COM2 port on the IPC300.
Software drivers
Operation of the touch screen requires the appropriate software drivers for
the operating system. To install the drivers, proceed as follows:
D
from CONTROL PANEL
"
MOUSE
"
DISKETTE
and select the touch screen controller on the path:
IPC300:
C:\Rbtool\Elotouch\MMWin95\Setup.exe (Windows 95)
OR:
C:\Rbtool\Elotouch\MMWinNT\Setup.exe (Windows NT)
D
or Version 3.10 onwards (only Windows NT) directly using the correspon-
ding SETUP.EXE file:
C:\Rbtool\Elo–DRV\EloNT\Setup.exe
Summary of Contents for 1070 083 221
