Bosch 060088A071, Instructions Manual

Page: 10 / 41

10 | English
Problem Possible Cause Corrective Measure
Setting for raking/verticutting too low for the con-
ditions Increase working height
Obstructed rotor Clear obstruction (always wear protective gloves)
Blocked side grilles Clear debris from the outside of the side grilles
Grassbox full Empty the grassbox regularly
Garden tool runs inter-
mittently Extension cable damaged Inspect cable, replace if damaged
Internal wiring of garden tool defective Contact Bosch customer service agent
Worn/Missing tines/blades Contact Bosch customer service agent
Conditions too wet Increase working height (see "Tips for Raking/Ver-
ticutting Lawns")
Too much debris on the ground See below
A)
Possible clog Check underneath the garden tool and clear out
as necessary (always wear protective gloves)
Setting for raking/verticutting too low for the con-
ditions Increase working height
Grass too long Cut grass
Very uneven surface Increase working height
Grassbox full Empty the grassbox regularly
Garden tool runs stiffly
or belt squeaks Working height too low Increase working height (see "Adjusting the Work-
ing Height")
Cutting tines/blades
not rotating Cutting tines/blades obstructed by grass Clear obstruction (always wear protective gloves)
Belt slipping or damaged Contact Bosch customer service agent
Excessive vibrations/
noise Cutting tines/blades damaged Contact Bosch customer service agent
Poor work perform-
ance Ground too moist for raking/verticutting Increase working height (see "Tips for Raking/Ver-
ticutting Lawns")
Setting for raking/verticutting too low for the con-
ditions Increase working height
Possible clog Check underneath the garden tool and clear out
as necessary (always wear protective gloves)
Blocked side grilles Clear debris from the outside of the side grilles
Missing tines (only UniversalRake 900) Contact Bosch customer service agent
A) In conditions with excessive tree debris (e. g. leaves, twigs, etc.), first clear the surface by using the product with the working height set to
3 or 4.
After-Sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
F 016 L94 117 | (23.10.2020) Bosch Power Tools