-14-
Initial Operation
Protect the tool against moisture and direct
sun irradiation.
Do not subject the tool to extreme temperatures or variations
in temperature.
As an example, do not leave it in vehicles for longer
periods. In case of large variations in temperature, allow the tool to
adjust to the ambient temperature before operation. In case of extreme
temperatures or variations in temperature the accuracy of the tool can
be impaired.
Avoid heavy impact or falling of the tool.
After heavy exterior impact
on the tool, an accuracy check should always be carried out before
continuing to work (see “Leveling Accuracy”).
Switch the tool off during transport.
Slide the On/Off switch
2
to
the “Off” position when transporting the measuring tool. This locks the
leveling unit, which can be damaged in case of intense movement.
Switching On and Off
Do not leave the switched on tool
unattended and switch the tool off after use.
Other persons could be blinded by the laser beam.
Do not point the laser beam at persons
or animals and do not look into the laser
beam yourself, not even from a large distance.
To switch on the tool,
slide the On/Off switch
2
to the “On” position.
Immediately after switching on, th
e tool sends laser beams from the
laser beam outlets
1
.
Operation
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
