Bosch 0 601 6B2 0E0, Original Instructions Manual

Page: 9 / 30

Technical Data
Hand-held circular saw GKS 20-65
Article number 3 601 FB2 0..
Rated power input W 2000
No-load speed rpm 5300
Max. cutting depth with 184 mm saw blade diameter
– at a 0° mitre/bevel angle mm 62
– at a 45° mitre/bevel angle mm 46
Spindle lock ●
Base plate dimensions mm 302 x 160
Max. saw blade diameter mm 184
Min. saw blade diameter mm 184
Max. base blade thickness mm 2.0
Locating bore mm 15.9
Weight according to
EPTA-Procedure 01:2014 kg 5.7
Protection class / II
The specifications apply to a rated voltage [U] of 220 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according
to
EN 62841-2-5 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
92 dB(A); sound power level
103 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-2-5 :
Sawing wood: a
h
< 1.4 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
u
Only use saw blades the maximum permitted speed of
which is higher than the no-load speed of the power
tool.
Inserting/changing the circular saw blade
u
Pull the plug out of the socket before carrying out any
work on the power tool.
u
Wear protective gloves when fitting the saw blade.
Danger of injury when touching the saw blade.
u
Only use saw blades that match the specifications
given in this operating manual and on the power tool.
u
The permitted speed of the application tool must be at
least equal to the maximum speed marked on the
power tool.
If accessories run faster than their rated
speed, they may break and fly off.
u
Do not use abrasive wheels as the application tool un-
der any circumstances.
Removing the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
– Press and hold the spindle lock button
(4) .
u
Do not press the spindle lock button (4) while the saw
spindle is moving. The power tool may become damaged
if this happens.
– Use the hex key (17) to undo the clamping bolt (18) in ro-
tational direction ➊ .
– Swing the retracting blade guard (11) back and hold on
to it firmly.
– Remove the clamping flange (19) and the saw blade (20)
from the saw spindle (22) .
Selecting the saw blade
You will find an overview of recommended saw blades at the
end of these operating instructions.
Fitting the saw blade (see figure A)
To change tools, we recommend that you place the power
tool down on the front side of the motor housing.
– Clean the saw blade
(20) and all the clamping elements
to be fitted.
– Swing the retracting blade guard (11) back and hold on
to it firmly.
– Place the saw blade (20) on the mounting flange (21) .
The cutting direction of the teeth (direction of the arrow
on the saw blade) must match the rotational direction of
the arrow on the protective guard
(11) .
– Attach the clamping flange (19) and screw in the clamp-
ing bolt in rotational direction ➋ . Ensure that the mount-
ing flange (21) and clamping flange (19) are installed in
the correct position.
– Press and hold the spindle lock button (4) .
English | 9
Bosch Power Tools 1 609 92A 4JV | (20.09.2018)