A10VO PISTON PUMP MANUAL-MODULE 3A
TEST EQUIPMENT
Gauge Test Port Kit
To assist in commissioning the A10V0 pump you may purchase a test kit that can be installed on
the control valve as shown under Identification Drawing. Simply remove the plug and install the
following parts before commencing pressure adjustments.
198400 - Test Kit Includes:
•
1 only P/N 101077 Adaptor Fitting
•
1 only P/N 002036 Threaded Connector
•
1 only P/N 001020 Capillary Hose
•
1 only P/N 003450 Direct Connector
•
1 only P/N 014386 Pressure Gauge (0–3000 PSI)
PORT SIZES
Model code 103616 and 149312
Reference: A10V071 Series 31
Suction Port = 2"SAE Flange
Pressure Port = 1" SAE Flange
Case Drain Port = SAE–10 (7/8–14)
Load Sense Port = SAE–4 (7/16–20)
Model Code 131006
Reference: A10V045 Series 31
Suction Port = 1 1/2" SAE
Flange Pressure Port = 1" SAE
Flange Case Drain Port = SAE–10 (7/8–14)
Load Sense Port = SAE–4 (7/16–20)
Model code 130272
Reference: A10V045 Series 52
Suction Port = Threaded 1 7/8–12
Pressure Port = Threaded 1 5/16–12
Case Drain Port = SAE–10 (7/8–14)
Load Sense Port = SAE–4 (7/16–20)
Model code 130985
Reference: A10V028 Series 31
Suction Port = 1 1/4 SAE Flange
Pressure Port = 3/4 SAE Flange
Case Drain Port = SAE–8 (3/4–16)
Load Sense Port = SAE–4 (7/16–20)
Bosch Rexroth Canada Corp. 3426 Mainway Dr. Burlington, ON L7M 1A8
www.boschrexroth.ca
16/06/2006
Page 12 of 23