Check that all accessories are complete and the unit is
not damaged. Fill water into water tank to the MAX level
and brew water for several times without coffee powder,
then discard the water. Clean and dry all detachable
parts thoroughly according to the section “CLEANING
AND MAINTENANCE” .
1.Open the top cover and fill the water tank with
drinking water. The water level should not exceed MAX
level as indicated on the water level gauge.
2.Place the funnel into the funnel support, make sure it
is assembled correctly, otherwise the top cover cannot
be closed. Place a filter or paper filter in the funnel.
3.Add coffee powder into the filter. Usually a cup of
coffee needs a level spoon of coffee powder, but you
may adjust according to personal taste. Close the top
cover completely.
4.Insert the glass carafe with lid closed onto the thermal
insulation plate horizontally.
5.Plug the power cord into the outlet, the LCD display
indicates “12:00” and it blinks.
6.Rotate the knob to set the current clock. Turn the
knob to the “HOUR” setting and then press the knob
once, one hour can be increased. And the “HOUR” can
be increased fast if hold and press the knob for more
than 1.5 seconds.
7.After setting the “HOUR”, turn the knob to the “MIN”
setting and then press the knob once, one minute can
be increased. And the “MINUTE” can be increased fast
if hold and press the knob for more than 1.5 seconds.
8.After finish setting the current clock, press the knob
once to confirm, then the clock starts to run.
9.Rotate the knob to the “ON/OFF” setting, then press
the knob once, the ON/OFF indicator illuminates in red,
and the coffee maker starts to brew normal coffee. If
you want to brew thick coffee, turn the knob to the
“STRENGTH” setting, the “STRENGTH” indicator
illuminates in orange, then turn the knob to the
“ON/OFF” setting and press the knob once, the ON/OFF
indicator will illuminate in red and the coffee maker will
brew thick coffee.
Note: To cancel the “STRENGTH” setting, turn the knob
to the “STRENGTH” setting and press the knob once.
10.The brewing process can be interrupted by pressing
the knob again at any time, and the ON/OFF indicator
will extinguish, indicating your coffee maker is shut off.
Note: You can take out carafe, pour and serve at any
time. The appliance will stop dripping automatically. But
the time cannot exceed 30 seconds.
11. Remove out carafe to serve when finish brewing
(about one minute later after the coffee stops dripping
out.)
Note: The coffee you get will less than the water you
have added, as some water is absorbed by coffee
ground and adhere to the plastic.
12. When the process is finished, if you do not want to
serve immediately, keep the coffee maker be energized,
BEFORE THE FIRST USE
USING YOUR COFFEE MAKER
