14
tipstim
®
Instruction Manual
For assistance please contact the manufacturer or your local supplier.
On completion of 100 therapy sessions with a single
tipstim® glove
display will showfollowing message:
Please change
tipstim® glove
for a new one immediately.
Please confi rm the change of
tipstim® glove
by keeping the selection button “-“ of channel
1 pressed (left channel, please refer to “technical description” in the menu) while switching
on
tipstim®
by pressing the “ON/OFF”-button. Display will show a code request. Please en-
ter the 4-digit code that has been delivered along with your new
tipstim® glove
as follows:
Please use the selection buttons “+” and “-“ to enter the fi rst digit. Confi rm your entry by
pressing the “OK”-button. Now enter the 2nd digit as described above and continue until all
4 digits have been entered. Display will now show following message:
Please
confi rm by pressing the “OK”-button. The message will
no longer appear and the integrated counter starts at zero again.
Preparing a therapy session
Please choose a quiet place for the therapy session. You should be sitting comfortably or
lying down. Please make sure the device is secured and protected from falling down. When
preparing the therapy session the device must be switched off. The fi rst setting of the cor-
rect current intensity has to be made by your doctor/medical expert.
The therapy should not be unpleasant or painful; however, you should feel a clear electrical
tingling sensation.
When using
tipstim® glove
please consult the instruction manual of
tipstim® glove
.
Further hints
■
Please clean and dry thoroughly the skin area to be treated. In case of using the
optionally available self-adhesive surface electrodes the skin area to be treated must
be completely depilated.
■
Connect the plug of the electrode cable (k4med) to the socket (CH 1/2) of the device.
ATTENTION!
Please change
glove!
