BOS Suspension Factory Series, Service Manual

Page: 13 / 32

13

Remove the rod assembly from the cylinder and place it on your
workbench.
- Beware of oil splashes, please wear protective glasses.
- During this step, oil may leak out of your shock absorber. Be sure
to put an oil pan under your vise to collect the used oil.

Pour the contents of your shock into an oil pan and
let it drain for a fex moments.
Don't throw your oils into nature, recycle them
to protect our environment.
DISASSEMBLY OF CYLINDER SET

Tap the gas cap with a mallet to make the locking ring accessible.
Required tools :
- By hand
Required tools :
- By hand
Required tools :
- Mallet