Product Code: BAJ2080
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
WARNING
FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE & PERSONAL
INJURY
Support load by appropriate means after
lifting
Do not exceed rated capacity
Centre load on the jack
Only use attachments and/or adapters
supplied with or sold specifically for the
jack
Only lift areas of the vehicle designated by
the vehicle manufacturer.
Use as lifting device only
Use only on hard, level surface
Do not modify jack
SAFETY OPERATNG INSTRUCTIONS
This jack should be used for lifting and lowering only. The raised vehicle should be
supported on approved vehicle stands. No person should get any part of the body
under a vehicle that is supported by this jack.
Position the jack to only lift on the areas of the vehicle specified by the vehicle
manufacturer.
Use support stands – after lifting the vehicle always support the load with
appropriately rated vehicle support stands before working on the vehicle.
Do not overload this jack beyond its rated capacity. Overloading this jack beyond its
rated capacity can cause damage to or failure of the jack.
Use only on hard level surfaces capable of sustaining the load. Use on other than
hard level surfaces can result in jack instability and possible loss of load.
Centre load on jack saddle before lifting vehicle.
Off centre loads and loads lifted when the jack is not level can cause loss of load or
damage to the jack.
Keep hands & feet clear of the jack hinge mechanism & ground contact area when
lowering the load.
THIS JACK IS A LIFTING DEVICE ONLY & IS DESIGNED FOR LIFTING PART OF THE TOTAL
VEHICLE. DO NOT MOVE OR DOLLY THE VEHICLE WHILST THE VEHICLE IS ON THE JACK.
