Bort 93416145, Manual

Page: 9 / 34

9
16 . High pressure hose reel .
THE COMPLETE SET INCLUDES:
• Adjustable spray nozzle;
• Pressure hose;
• Filter;
• Quick nozzles;
• Foam generator;
• Nozzle cleaning pin;
• Quick connector;
• Turbo nozzle .
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .
SAFETY INSTRUCTIONS
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury . Read the fol-
lowing safety instructions and also the enclosed safety
instructions .
Keep these instructions in a safe place!
Electrical safety
Always check if your mains voltage corresponds with the
value on the type plate .
When replacing old cables or plugs: throw away old
cables or plugs immediately as soon as new ones have
replaced these . It is dangerous to put the plug of a loose
cable into the socket outlet .
When using extension cables:
Only use an approved extension cable that is suitable for
the machine’s power . The cores must have a diameter of
at least 1 .5 mm2 . When the extension cable is on a reel,
unroll the cable in its entirety .
All electrical connections e .g . extension cable, must be of
an approved waterproof type for outdoor use and marked
accordingly . Extension cables must be threecore, one of
which is EARTH .
Switch off the machine immediately in case of:
17 . Malfunction in the mains plug, power cable or damag-
ing of cable .
18 . Broken switch .
19 . Smoke or stench of scorched insulation .
Specific safety rules
• Do not disconnect the plug by pulling on the electrical
cable .
• If you are too far from the object you wish to clean, do
not move the cleaner nearer by pulling on the high pres-
sure hose; use the handle provided .
• Do not obstruct the ventilation grilles during operation .
• The cross-section of any extension cables used must be
proportional to their length, i .e . the longer the extension
cable, the greater the cross-section; cables with a protec-
tion level of “IPX5” must be used .
• Position the high pressure
cleaner AS NEAR POSSIBLE to
the water supply .
• Use the high pressure
cleaner only with accessories and
replacement parts authorized by the manufacturer . The
use of original accessories and replacement parts will en-
sure safe, trouble-free operation .
• Avoid unintentional firing of the trigger . Do not carry
the lance / trigger assembly with your hand over the trig-
ger . Always use the trigger lock mechanism .
• Ensure that the safety lock on the trigger is used, when
you have stopped using the pressure washer to prevent
accidental operation .
• Do not use the cleaner with inflammable or toxic liquids,
or any products which are not compatible with the correct
operation of the high pressure
cleaner .
• Do not direct the water jet towards the unit itself, electri-
cal parts or towards other electrical equipment .
• Do not allow children or incompetent persons to use
the high pressure
cleaner .
• Do not touch the plug and/or socket with wet hands .
• Do not use the high pressure
cleaner if the electrical ca-
ble is damaged .
• Do not use the high pressure
cleaner if the high pressure
hose is damaged .
• Do not jam the trigger in the operating position .
• Check that the data plates are affixed to the high pres-
sure
cleaner, if not, inform your dealer . Cleaners without
plates must NOT be used as they are unidentifiable and
potentially dangerous .
• Do not tamper with or alter the calibration of the safety
valve .