07
EN
Fitting instructions
The brace is attached when standing. Place the brace around the waist and attach
both closing sides using Velcro evenly one above the other with a slight pull of the
hand straps. Ensure that the brace is placed centrally and the lower edge of the
support ends in the inguinal region (forward bend). This is the only means to achieve
the optimum effect from the BORT StabiloBasic Lady. The pad is attached to the
support with Velcro and can be freely positioned. Ensure that the wide side of the
pad points towards the head.
Removal
To remove the brace, open the front closure and remove the brace.
Material composition
Polyamide (PA), polyamide COOLMAX
®
(PA), elastane (EL), silicone (SI)
The sewn in textile label provides the precise material composition.
Cleaning information
Delicate wash Do not clean chemically Do not bleach
Do not dry in a tumble dryer
Do not iron
Do not use fabric conditioner. Stretch back into shape and dry in the fresh air. Close
the Velcro fastening to avoid damage to other laundry items.
Guarantee
The legal regulations of the country in which you acquired the product apply to the
purchased product. Please contact your specialist retailer if you suspect a warranty
claim. Please clean the product before submitting a warranty claim. If the enclosed
instructions for use have not been properly observed, the warranty may be impaired
or cancelled. The warranty does not cover use of the product inappropriate for
the indication, non-observance of application risks, instructions and unauthorised
modifications to the product.