2
Borroughs Document Number: A1-INST-08 Rev: —
LIFT CABINET
(ROTARY IN-BAY / CHALLENGER)
Note: Please refer to M1-INST-01
and M1-INST-09 for instructions on
anchoring and linking cabinets.
Remove drawer from housing by
releasing the safety clips on the
slide profile and then lifting the
drawer as you pull.
Using a steel cutting tool, remove
the 6x12 inch access panel from
the bottom or the rear of the
housing
depending
on
your
installation requirements.
Move the housing to its permanent
location and install anchors or link
to adjacent cabinets.
Route all required utilities through
the access hole into the housing.