Ups general description & installation
12 of 31
JUD408311
Rev.D JSE410920 22/07/08
3. INSTALLATION
3.1 RECEIPT OF THE UPS
When the UPS is received, please attend immediately to its unpacking and carry-out
an accurate visual check to be sure that the equipment has not been damaged during
transport.
IMPORTANT
In case of objections relating to damage incurred during transport these must be
immediately notified to the transportation company after receipt of the equipment.
When the UPS is not installed immediately it must be stored carefully in vertical
position, as indicated on the packing and conserved in a dry and sheltered room in its
box so that it is protected from dust.
3.2 HANDLING OF THE UPS
Before positioning the UPS, in order to avoid risks of turnover, it’s recommended to
move the system on the wood pallet on which the UPS is fixed.
Before the positioning in the final location, remove the UPS from the pallet.
The UPS can be lifted and handled using a pallet truck or a forklift.
- UPS up to 40 kVA
The UPS’s up to 40 kVA (B8031 series 10-20kVA and B8033 series 10-40kVA) can
be handled by means of the four wheels fixed on the bottom. The UPS technical data
are shown on a label fixed on the rear.
Picture 6 – Handling of UPS up to 40 kVA