. Ensure all accessories are correctly installed and the juice collector and pulp collector are
properly placed.
JUICING
. In order to insert fruits in the feeder unit easily, cut fruits into small pieces.
. Put the power plug into the main socket and switch ON the main supply.
. To start the juicing process select the switch from O to I position; the juicer will
start operating.
. Put the fruit pieces into the feeder tube and slowly push it down with the pusher, in order to
avoid the fruit pieces from getting stuck in the feeder tube.
. Make sure the juice outlet cap is in open position in order to collect the juice into the juice jug
and ensure that the pulp is getting collected into the pulp collector.
. To clean the filter / to remove the stuck pulp shift the switch to II position. The motor will
rotate in reverse direction and the stuck pulp will get resolved.
a) Fruits with less juice such as banana, apricot, etc. are not recommended to be used in the
Slow Juicer.
c) Make sure to run the appliance for a maximum of minutes in case of soft fruits, such as apple
or pear. For tough fruits and vegetables, like carrots, the maximum time is minutes . It has an
intelligent safety feature to sense overheat, so If suddenly it turns off due to long use, please
wait until it resumes.
Depending on the circumstance and the temperature of the
motor, it can take time (approx. 40 mins) to resume.
. Place on a flat surface and wipe the surface with a cloth
. Before cleaning, unplug the power plug from the main socket and let the machine
stop completely.
. Remove all the parts in a reverse procedure. Rinse with clean water.
. Clean all the accessories with water except the motor unit
b) To prevent product damage during use, do not add hard objects or hard food material like
sugarcane, nuts, the core of pineapple or raw fruits like unpeeled lemon
. After juicing, remove all parts as per reverse procedure
. Use the brush to wash the squeezer, filter and juicing jug with running tap water.
. After cleaning, dry the product with a dry cloth, install and store it in a dry and safe place.
. Before flushing the outlet of feeder tube, pull out the bottom silicone sheet and,
after cleaning, install silicone sheet correctly;
CLEANING AND MAINTENANCE
. Please close the lid every time before use
NOTE:
Warning:
To prevent scratches, take care and properly clean the mesh of strainer.
6
5
7
8
Summary of Contents for BSJU13WB01
Page 8: ...1800 224 552 ...
