background image

12 | 13

CLEANING

• Dry damp personal protective equipment in 

the air, not on artificial heat sources. Dry  

metal components with cloths.

• Brush soiled textile components (full body 

harness, and ropes etc.) when dry or wet with 

a brush or possibly with lukewarm water and 

a little detergent for delicates. No other 

cleaning agents may be used!

LIFE SPAN

Maximum usage period of fall arrester SSE 02 

after being used for the first time:

up to 10 years

 

• Textile components are subject to aging (brit-

tleness). Their service life can also be signifi-

cantly reduced, if exposed to temperatures, 

chemicals and wear, and due to storage and 

use! 

• Arrange for the fall arrester SSE to be inspec-

ted by a trained expert at least once a year 

and enter the inspection results into the test 

card.

• On pylons: Always arrange for a qualified per-

son to check the securing rope SSE every time 

before use, and then 're-commission'. 

• It should be inspected and documented by a 

trained expert at least once a year.

REPAIRS

• For reasons of liability, repairs may only be 

carried out by the manufacturer.

• Only original spare parts from the manufactu-

rer may be used.

STORAGE

• Dry damp personal protective equipment  

before storing.

• Store away from light in a dry place.

• Do not store rope protection equipment close 

to radiators. Permanent temperatures of over 

+50 °C have a negative impact on the strength 

of the textile material and will reduce the life 

span.

• Do not allow personal protective equipment 

to come into contact with aggressive substan-

ces (e.g. oils, grease, acids, chemicals).

• Store and transport the personal protective 

equipment in the device case or device bag.

• The fall arrester equipment is generally made 

of corrosion-resistant materials (stainless 

steel, aluminium). Nevertheless, permeants 

exposure to corrosive influences should be  

taken into account (e.g. seawater atmosphere 

or chemical influences).

TRANSPORT

Transport the personal protective equipment in 

the device case or device bag.

OTHER

Summary of Contents for SSE 02





















Reviews: