Bornack FALLSTOP FS BK, User Manual, Page: 22 / 32

22 | 23
OTHER
MAINTENANCE
• If necessary, apply a small amount of
oil on the joints so that the moving
parts of the karabiner and other
devices run smoothly. If possible, use
precision mechanics oil. Ensure that
the oil does not come into contact
with textile PPE components.
• Maintenance may only be carried out
by a qualified expert in compliance
with DGUV Principle 312-906. All
instructions in this User Manual must
be strictly observed.
• Protective equipment that is clean and
well looked after will last longer!
CLEANING
• Dry damp personal protective equip-
ment in the air, not on artificial heat
sources. Dry metal components with
cloths.
• Clean soiled textile components (e.g.
arrester harnesses and ropes) with
lukewarm water and a little detergent
for delicates. Then rinse carefully and
allow to dry in the air. Other cleaning
agents are not allowed!
• If disinfection is necessary, please
contact the e-mail hotline:
info@bornack.de
• If the personal protective equipment
comes into contact with salt-water,
keep it wet until it can be rinsed with
plenty of distilled water.
• Use compressed air to blow on the
unit if necessary.