4
www.BormannTools.com
GB
Battery smart digital display charger
→
LCD display charging current, battery voltage, at any time to understand the status of charging.
→
Automatic detection of battery failure, short circuit, negative and positive connected to the reverse lead to failure.
→
No need for personnel management, automatic charging, full stop, will not cause overcharging
→
Intelligent charging:
PWM microcomputer chip
automatically judges the battery status, automatically selects the charging mode, and the charging
time is short.
→
The energy conversion efficiency is more than 80%, saving more than 30% compared with the traditional charger.
→
Wide voltage design 180~260V can be used normally, to meet the voltage instability in some areas can still be used
normally.
→
Strong adaptability to the battery, battery zero voltage can be charged.
Use of chargers
When directly charging the lead
-
acid battery in the car, charge the 12V battery, and the battery voltage will be automatically
set to 12V.
Similarly, when charged with 24V, the voltage is automatically selected on 24V.
Please remove the original battery cable before connecting the charger for charging.
The red charging clip is connected to the positive pole of the battery pack +, and the black charging clip is connected to the
negative pole of the battery pack
-
Connect the charger to the power supply.
Judge the charging process and result according to the indicator light.
Rated input: 180
-
260v AC 50/60 Hz
Applicable battery specification: 12V/24V lead
-
acid battery pack
Matters needing attention
This charger aims at the particularity of automobile battery and adds the function of repair and charging:
1. This product shall not be used in inflammable and explosive situations.
2. The charger is only for indoor use, and it is not allowed to be soaked in water or rain!
3. There
are high voltage, do not open the shell, children are prohibited to contact!