BorMann PRO BWC2000, Owner'S Manual, Page: 10 / 12

10
www.BormannTools.com
After normal operation, the rotating cutting piece is pressed into the cut body, and the machine is moved forward to complete the
cutting operation. (Figure
①
)
When the shield is closed, it is used to cut (grooving) plane wall
The shield close cond ition
2.Cutting depth free to adjust
3.Installation and replacement of saw blades
Note: Before installing the cutting blade, you must disconnect the power and pull out the plug!
1.Remove the s
ide clamp screws 2.Put the saw blade in
4.Put the saw blade in and so on
3.One or more saw blades between each saw blade
5. Put the clamp and screw 6.Hold the nut with a wrench, tighten
the screws, and install it
Warning :
Before maintenance and maintenance of any machine, be sure to cut off the power and pull out the plug!