BorMann PRO BBC9010, Instruction Manual

Page: 2 / 8

EN
WWW.BORMANNTOOLS.COM 2
Safety instructions
Description of main functions/Intended use
WARNING: Please read and understand all important safety and operating instructions before using this item. In addition, please read and follow all vehicle and
battery manufacturers’ instructions and cautionary markings.
1) Use the Device for jumpstarting a 12V LEAD-ACID battery only. Do not attempt to jump-start a vehicle with a non-rechargeable or defective battery.
2) Working in vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal operation. Use in well-ventilated area. Battery acid
can cause permanent blindness. Avoid touching eyes while working near battery.
3) Do not smoke, strike a match, or cause a spark in vicinity of battery or engine. Avoid explosive gas, flames and sparks.
4) Remove all personal jewellery, such as rings, bracelets, necklaces, and watches before jumpstarting operations. These items may produce a short-circuit that
can cause severe burns.
5) To avoid damage to the vehicle’s electrical system, do not use the Device on a vehicle that has no battery installed.
6) Use of an accessory not recommended or sold by the manufacturer may result in a risk of fire, electric shock or injury to persons. Do not operate with dam-
aged accessory(s).
7) Locate the Device as far away from battery as jumper cables permit.
8) Do not expose to rain or wet conditions.
9) To reduce the risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting.
10) Operate with caution if the jump starter has received direct hit of force or been dropped.
Have it checked and repaired if damaged.
11) Any repair must be carried out by the manufacturer or an authorized repair agent in order to avoid danger.
Description of main parts
Technical data
Capacity: 15000 mAH
Input: 15V/1A
Output:
1) 5V/1A USB, 5V/2A USB
2) 12V/10A for automotive devices
3) LED Flashlight (On, Strobe, SOS)
4) 12V emergency Jump Start up
Starting Current:
300A
Peak Current:
600A
Lifetime: ˃1000 Cycles
* The manufacturer reserves the right to make minor changes to product design
and technical specifications without prior notice unless these changes significantly
affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all
repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service de-
partment of the manufacturer.
WARNING: FULLY CHARGE IMMEDIATELY AFTER PURCHASE. Fully recharge after each jump-starting, or every 3 months to ensure long battery life.
It features low voltage protection (for the Device itself), spark proof, reverse polarity protection, short circuit protection and overheat protection (this item will
shut off to prevent damage to itself when internal temperature is too high). This item can instantly jump start most single battery vehicles, up to 70+ (over 70)
times on a fully charge. The Device is also equipped with LED flashlight, USB power output, and 12VDC power output.
1 2
3
4
5
6
7
8
9
10
1. Input Charging LED
2. Digital Display
3. Digital Display On/Off Button
4. Engine Start Socket
5. LED Flashlight
6. Flashlight On/Off Button
7. 12V Output Port
8. USB Output Ports
9. Engine Start On/Off Button
10. 15V/1A Input Port