BorMann PRO BAT3010, Quick Start Manual

Page: 2 / 6

EN
WWW.BORMANNTOOLS.COM
2
WARNING!
Upon receipt of the product, read and follow all safety rules, operating instructions before first use it. And Failure to follow all warnings and instructions may
result in serious injury. Retain this manual for future reference.
Store the manual in a safe place for future
You will need the manual for the safety warnings and precautions,assembly instructions,operating and maintenance procedures. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and in-voice in a safe and dry place for future reference.
WARNING! When using tool,basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet locations, Don't expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines,tools,or extension cords.
4. Store idle equipment. When not in use,tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5. Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to
exceed the tool capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose
for which it was not intended.
7. Dress properly. Do not wear loose clothing or jewellery as they can be caught in moving parts. Protective,electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to contain long hair.
8. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear
an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
9. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
10. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized technician, the handles must be kept clean, dry, and free from oil and grease at
all times.
11. Disconnect power. Unplug when not in use. Do not yank power cord from the receptacle. Do not carry tools by the cord.
12. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in.
13. Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging in. Do not carry any tool with your finger on the
trigger,whether it is plugged in or not.
14. Stay alert. Watch what you are doing,use common sense. Do not operate any tool when you are tired.
15. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate,properly and
perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures;and any other condition that may affect
proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn
On and Off properly.
16. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,radiators,ranges,and refrigerator enclosures.
17. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accesso-
ries intended for use with this tool. Approved accessories are available from Bormann tools.
18. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt,do not operate the tool.
Safety Warnings and Precautions
Technical data
Operating Instructions
Before Each Use
1. Drain water from air compressor tank and condensation from air lines. (Please refer to air compressor’s operation manual.)
2. Lubricate the tool. (Please refer to the “Maintenance” section in the manual.)
3. Select the necessary sockets. The socket has to match with the size of the drive on the air impact wrench.
4. Connect air impact wrench to air source with the hose of recommended size.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice
unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages
of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features
and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of
the manufacturer.
Square drive: 1/2''
Bolt capacity: M22
Max. torque: 850Nm
Free speed: 7000rpm
Average air
consumption:
5cfm
Air pressure: 90Psi ,6.3Kg/Cm2
Length: 194mm
Weight: 2.30Kg