BorMann Elite DS1010, Quick Start Manual

Page: 2 / 4

EN
WWW.BORMANNTOOLS.COM
2
WARNING INDICATORS
1.Display "o-EEr" on weight displaying means the scale is overloaded (Range: 100%FS+9d).
2.Display a “ ” mark on the displaying window means the battery is about to run out, please charge as soon as possible.
3.Display “accerr” mark on display window means it doesn’t meet accumulative condition, pls reset weight reading to zero and load again, start accumulation
function afterweighing value stable.
4.Display “b-Err”on displaying window meanbattery voltage is too low to work, please charge immediately.
HOW TO CHARGE
When display “b-Err” on displaying window, it means the battery voltage is too low to work and need to be charged immediately. Connect the plug
of adapter to power source and other sides to the DC socket. In power OFF condition, the charging signal will light up, the battery can be fully charged after 10 hours.
CARE & MAINTENANCE
1. DO NOT strike, shock or overload the scale, even if scale power off.
2. DO NOT reverse polarity of the rechargeable battery (Connect red wire to red port, and black wire to black port.)
TECHNICAL SPECIFICATIONS for Μodel DS1010
BASIC FUNCTION
Weighing Function: AutoZeroafter switch on, loadedweight, display weighing value; range of auto zero is ± 100%;
Key illustration
1. [ZERO]: Reset weighing reading to zero, the range of ≤ 4 % FS.
2. [TARE]: Cancel the tare value, "TARE" sign displaying, Tare range < 100 % FS.
3. [UNIT]: "g" - Weighing, "pcs"- Counting, "%"- Percentage, "kg"- Weighing.
4. [Sample]: To set up the unit weight by number keysinput.
5. [M+]: Press [M+] button to add up total amount, Sum displaying window shows “Acc um”representing total quantity of adding up, and 1 SEC and 1 SEC
returns to weighing state.
6. [MR]: Press [MR] button displaying window shows total amount, press it again to delete total amount.
OPERATION METHOD
1. ON/OFF: Press the ON/OFF switch at left side to turn on scale, displaying window light up, shows version number and maximum capacity when buzzer tin -
gling; and then display the batter voltage left and turn back to weighing state; if no loading, the “ZERO ”symbol light up.
2. Weighting: Loaded the object after auto-zero, display window shows weight automatically; under weighing state, press [ZERO] button to reset weight reading
to zero (Zero range of 4%FS); press [TARE] button to deduct tare value (Tare range of 100% FS).
3.Counting function: Press [UNIT] key to switchover to “PCS”counting function, loading sample, press [MR] key to change quantity after press [SAMPLE] key,
only “10%”, ”20%”, ”50%”, ”100%” can be set, then press [SAMPLE] key to save memory and begin counting function.
4.Percentage function: Press [UNIT] key to switchover to “%” percentage function, loading sample, press [MR] key to switchover to percentage function after
pressing [SAMPLE], only “10%””20%””50%””100%” can be set, and then press [SAMPLE] key to save memory and begin percentage function.
5. Sample weight are required greater than 0.8 division, and greater than minimum capacity, or will affect precision.
DS1010: counting scale 30 kg/1g, LCD screen with white backlight, counting function, built-in 4v/4ah recharchable battery, ac/dc charger, 3 months operating
time on full charge, automatic energy saving mode.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif -
icantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.