EN
WWW.BORMANNTOOLS.COM
3
Winding
- With the end of the hose, go back to the hose box..
- Turn off the switch, loosen the connector of lead hose to release the pressure
.
Installation and operating instructions (BWR5144)
Installation
1. Take out the unit and accessories from the box.
2. Choose a suitable place near source of air.
3. Take the mounting bracket as a template to mark the position for screws and drill four holes on the wall (Fig.2).
4. Fix the bracket by four self-tapping screws accordingly (Fig.1).
5. Connect the reel to the mounting bracket.
Operation
Connect the leader hose to the air source, then turn on the switch.
Unwinding
- Pull out hose to desired length and stop.
Winding
- With the end of the hose, go back to the Hose Box.
- Turn off the air source, loosen the connector of lead hose.
Note: Please do not over-pull the hose to the end.
Warning: The hose box must not be cleaned internally with water.
Fig. 2
Fig. 1
Maintenance
- When not in use, please turn off the source of air, and make sure to release the air pressure.
- The reel cannot not be used to transmit any chemical and substance
- When not in use for an extended period of time it is recommended to be stored in a cool dry place.
Troubleshooting (BWR5127)
- During the process of retracting / pulling out the hose. If the hose is locked, please pull out more hose again, then retry the work.
