BorMann BPW3000, User Manual

Page: 14 / 23

To prevent the maximum operating pressure, the outlet hose should be at least 3M long.
Do not use the pressure cleaner in inflammable environment.
Take care of the kickback force and the sudden torque on the spray assembly when opening
the trigger gun. Always use two hands to grip the gun firmly before pressing the trigger.
Only press the switch after the high pressure hose is tightly fixed.
Always wear protective clothing, glove and safety glasses. It’s forbidden to use the machine
bare-footed or when wearing a sandal.
By operation keep the hand away from the water jet and hose.
Sometimes the reflected water is also dangerous.
Do not direct the water to fire or hot equipment. Hot particles and steam are dangerous.
Do not use the pressure washer with inflammable or toxic liquids, corrosive detergents, or any
dangerous products.
Use only hand to squeeze the trigger, do not jam the trigger in the ON position.
Before disconnect the high pressure hose, turn off the machine first, then squeeze the trigger
until there is no more pressure in the system.
Do not bend, twist or fold the hose.
Use only original spar parts supplied from manufacturer.
A fluctuating or high water pressure shows signal of defect or accumulation of the calcium in
the hose. In this case turn off the machine immediately.
Do not run the cleaner without water. This will cause damage to it.
Before starting the machine, fully open the water supply tap. Be careful not to bend the hose.
When the machine hose or tube freeze in winter, do not use it. Before storing the water must
be drained from the machine. Always store the pressure washer in a secure dry and frost
protected place
Do not use the machine in a dirty place.
Put the machine on a flat surface.
The sea water is not suitable for using in this machine.
The appliance is not fit for long time industrial use.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
The function of Safety valve: when the pressure of the pump exceeds the Preset valve,
returns the excess fluid to the inlet system.
The function of pressure switch: When turn off a gun, pressure switch on the action, cut off
the
power supply for protection operations.