4
www.BormannTools.com
User’s manual
Thanks for purchasing our series products-the hand-held laser range finder
First of all, before using this product please read the safety policy and direction for use.
Ⅰ
.Safety policy
Before using this product, please read all the terms and operational guide listed in this manual
carefully. The improper use of this product with breach of these safety policy and direction of use may
result in the dangerous injury of laser radiation, electric shock and personal injury.
Do not try to change the performance of the laser device in any way, thus it may result in the
danger caused by laser exposure. The laser can only be opened for use and please do not look in the
laser straightly. Please keep your device properly to avoid the use by other irrelevant personnel.
Do not use the laser to shine on other person deliberately or in the dark.
Do not use the laser to shine on the object with high-reflective surface.
Do not place the device on somewhere the children could touch and reach
Do not try to repair this device by yourself. If the device was damaged, please contact with your
local dealer.
The electromagnetic radiation may cause the interference on other equipment and devices (such
as the medical instruments like pacemaker or hearing aids.)
Do not use this device under the flammable and combustible environment.
Please dispose your wasted device according to your local laws and regulations.
Ⅱ
.Overview
Keyboard
ON/MEASURE/OFF
Ⅲ
.Power supply
By opening the cover of battery cabin to place the battery into the cabin correctly and then close the
cover of battery cabin accordingly. Both of the alkaline and carbon battery can be used here, but the
carbon battery may support relative less measurement times. If the device won’t be used for quite a
long time, please tale out the battery from cabin.
Ⅳ
.Operation
1. Press the button to power ON /measure distance
2. Long press it for 2 seconds to change units
3. Long press it for 3 seconds to power OFF.
Battery level indication
While all the segment code in the battery column are all displayed, it means that the battery level
shall be at the fulfilled status.
While the displayed segment code is quite less, it refers to the relative lower battery level;
While the empty battery column is displayed, the new battery should be used for replacing the old
one inside the device.
Signal strength indication
While all the segment code of signal are displayed, it means that there shall be the stronger echo
signal strength of measurement; while less segment code was displayed, it shall mean the relatively
reduced echo signal strength of measurement.