BorMann 037415, User Manual, Page: 6 / 15

EN
WWW.BORMANNTOOLS.COM
6
Foam cleaning method
Be sure to insert the cleaning solution in the built-in suction pot and remove the tip as shown
in the figure.
Units with patio cleaner included
Click patio cleaner ① with lance extension ② firstly and then connect it ② with spray gun handle ③.
Note: All these fittings are bayonet fittings which push in then twist to lock.
Note: Prior to using the patio cleaner always check that you will not damage the surface area on an inconspicuous
test area first.
* Not included with all models
Units with brushes included
The Electric Pressure Washer is supplied with a rotary brush and a fixed brush. Both have soft
bristles and can be used in conjunction with the detergent dispenser to apply detergent to the
surface you are cleaning. These are ideal for cleaning car bodywork, windows etc. This is a low
pressure setting. The brushes connect to the lance extension. There is an adapter with each
brush; you must fit it before connecting to the lance extension.
Note: Do not fit brushes when the power is on.
Note: The brushes cannot be fitted into the trigger gun and must be used in conjunction with
the lance extension.
* Not included with all models
Gun safety device
Whenever you use the high pressure washer, we suggest you grip the in the right position, with
one hand on the handle and the other on the lance, When you stop the machine it is necessary
to use the safety lock placed on the gun in order to avoid accidental.
Cleaning pin instruction
• Using included tip cleaner, or an unfolded paper clip, insert wire into the nozzle hole and
move back and forth until debris is dislodged.
• Remove additional debris by back-flushing water through the nozzle. To do this, place end of
a garden hose ( with water running ) to the end of nozzle for 30-60 seconds.
Nozzle Tip Cleaner