EN
WWW.BORMANNTOOLS.COM
4
TECHNICAL DATA
Model:
BBC2030
Input:
230VAC, 50/60Hz,1500W MAX
Output:
12/24VDC, 5/10/20A
Starting current:
80A 100A(1V)
Battery capacity:
350AH, all type of 12/24V lead-acid batteries (WET/MF/CA/
EFB/GEL/AGM)
Lowest Chargeable
Voltage:
3V
Additional
specifications:
- Alternator check function
- Independent STD/GEL/AGM battery type selection
- Digital display
- Detailed error messages on screen
- Charging functions: 10 steps, Fully-automatic Charging Cycle
- Housing protection: IP20
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages
resulting from the use of non-conforming equipment.
OPERATING INSTRUCTIONS
Display messages
Start up – After display screen and all LEDs illuminate for 0.5 second, battery voltage shows (meanwhile battery VOLTAGE LED is lit).
DISPLAY BUTTON
Digital display
LED indicator
Description
Battery-voltage
Voltage LED lit
When the charger is NOT working in
ENGINE START, the display will show
the battery VOLTAGE.
Battery - %
Battery % LED lit
When the charger is NOT working in
ENGINE START, the digital display
shows percentage of the battery
connected to the charger’s battery
clamps.
Alternator - %
Alternator % LED lit
The digital display shows an estimated
output percentage of the vehicle’s
charging system connected to the
charger’s battery clamps, compared to
a properly functioning system. The
alternator percent range is from 0% to
100%. Readings below 0% (13.4
volts/26.8 volts) will read LO and
readings above 100% (14.4 volts/28.8
volts) will read HI. If you get a HI or LO
reading, have the electrical system
checked by a qualified technician.