BorMann 036296, Manual, Page: 8 / 31

EN
WWW.BORMANNTOOLS.COM
8
3. Move left the throttle lever a little.
4. Start the engine as follows:
a. Hand-operated kick-starter. Push the engine switch to "ON". Pull slightly the starting rope handle up until feeling anti-action , and then make a rapid pull.
CAUTION
Releasing tbe handle suddenly may make it hitting the engine. Release the handle slowly conforming with its recoiling
force.
b) Electric starter
Push the engine switch to "START" and remain there until the engine starts. Once the engine starts. reset the engine
switch to "ON".
CAUTION
Use the engine switch not more than 5 minutes each time to avoid damage of the engine. Try once more 10 minutes
later after last attempt failures.
Running the engine
1. Preheat the engine and push back the choke lever to "OPEN".
2. Set the throttle lever in proper position to ensure the engine runs at required velocity.
Running the engine Running the engine
Choke lever
ON
Throttle lever
Low speed High speed
OPEN
Engine switch
(Electric start type)
Starting rope handle (Electric start type)
ON
Engine switch