BorMann 032755, Manual, Page: 4 / 11

EN
WWW.BORMANNTOOLS.COM
4
Operating Instructions
Basic Operation
Switch action
Before inserting the battery cartridge into the tool, always check to see that the switch trigger (4) actuates properly and returns to the “OFF” position when
released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.
Air volume adjusting dial (5)
Air volume can be adjusted to any of three settings by turning the adjusting dial (5) with the switch trigger fully depressed. Refer to the table below for the
relationship between the number on the dial and the air volume.
NUMBER ON THE DIAL AIR VOLUME
3 HIGH
2 MEDIUM
1 LOW
Blowing
For dust blowing, attach nozzle (1) to blower outlet (2), turning clockwise
to lock it in place.
Dust suction
For dust suction, fit nozzle onto suction inlet(3) and dust bag(9) onto blower
outlet. After the bag fills with dust, empty the contents of the dust bag into
a dust bin by releasing the fastener.