EN
WWW.BORMANNTOOLS.COM
3
Assembly Sketch of A Machine and Its Support Frame
1. Press the junction plate of the support frame to the top of the
thread bushing according to four holes
1.
Turn the screw outward to loosen the inner tube, no
need for completely out
2. Adjust the handle up and down to a proper height
2.
Use a HEX wrench to turn the screws which you got from
Step 1
into the thread bushing,please make sure the machine and
the support frame have been well connected without any wobble.
Connection board
Step 1: Please look at Sketch I, they are instructions to tell you how to as
-
semble a grinder and its support frame. For disassembly need, please do
it in an opposite way.
Step 2 Please look at Sketch II, they are instructions to tell you how to
adjust the height of the handle.
3. Turn the screw inward until the handle is fixed.
Sketch II
Sketch I