EN
WWW.BORMANNTOOLS.COM
5
Maintenance
WARNING!
Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance proce
-
dures.
Keep the tool's air vents unclogged and clean at all times.
Regularly check to see if any dust or foreign matter has entered the grills near the motor and around the trigger switch. Use a soft brush to remove any ac
-
cumulated dust. If the body of the saw needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other
cleaning agent.
Never use caustic agents to clean plastic parts.
General inspection
Regularly check that all the fixing screws are tight. They may vibrate loose over time.
If the supply cord needs replacing, the task must be carried out by the qualified service centre in order to avoid hazards.
