BorMann 027195, Manual

Page: 4 / 9

EN
WWW.BORMANNTOOLS.COM
4
7. Use right tool
Don’t force small tools or attachments to do the job of a heavy duty tool. Don’t use Tools for purposes not intended;for
example don’t use circular saw for cutting tree Limbs or logs.
8. Dress properly
Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear protective hair caverning to contain long hair.
9. Use safety glasses
Also use face or dust mask if cutting operation is dusty.
10. Don’t abuse cord
Never carry tool by cord or yank it to disconnect it from receptacle. Keep cord From heat,operate tool.
11. Secure overreach
Use clamps or a vice to hold work. It’s safer than using your hand and it frees both Hands to operate tool.
12. Don’t overreach
Keep proper footing and balance at all times
13. Maintain tools with care
Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and, if damaged. Have repaired by authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry clean and free from oil and grease.
14. Disconnect tools
When not in use,before servicing and when changing accessories such as blades. bits and cutters.
15. Remove adjusting keys and wrenches
From the habit of checking to see that keys adjusting wrenches are removed from tool before turning it on.
16. Avoid unintentional starting
Don’t carry plugged-in tool with finger on switch. Be sure switch is off when Plugging in.
17. Outdoor use extension cords
When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
18. Stay alert.
Watch what you are doing,Use common sense. Do not operate tool when your are Tired.
19. Check damaged parts
Before further use or the tool, a guard or other part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of moving parts,binding of moving parts,breakage
of parts,mounting,and any other conditions that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual. Have defective switches replaced by an authorized service center. Do not use
tool if switch does not turn it on and off.
20. Warning
The use of any other accessory or attachment other than recommended in this operating instruction or the catalogue may
present a risk of personal injury.
21. Have your tool repaired by an expert
This electric appliance is in accordance with the relevant safety rules. Repairing of electric appliances may be carried out only
by experts other wise it may cause considerable danger for the user.
Keep these instructions in a safe place.
Environmental information
You can help protect the environment! Follow local environmental regulations: Dispose ol unwanted electrical
equipment at an approved recycling station.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may
also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.