BorMann 023012, Owner'S Manual, Page: 8 / 14

8
www.BormannTools.com
Safety Symbols
WARNING! Please read all of the safety and operating instr uctions carefully before using this tool.
Please pay particular attention to all sections of this User Guide that carry warning symbols and
notices.
Important Safety Warnings
Please read the safety instructions! These instructions will make it e asier for you to handle the device and
help prevent misun derstanding and possible damage or injury .
1. Keep work area clear and well lit.
2. Keep children and bystanders away. Do not let persons not involved in the work near the work area.
3. Make sure all moving parts are free from interference.
4. Dress properly. Do not wear loose clothing that can be caught in moving parts.
5. Use personal protective equipment. Use safety goggles, ear muffs and gloves. Wear a dusk mask if working in
a dusty environment.
6. Check to make sure that all fixing screws and knobs are tight and the legs are locked before operating
clamping work station.
7. Ensure work station is set up on firm, level ground in a stable manner.
8. Be aware of over- balancing. When a large workpiece is cut from one end, the remaining piece may be heavy
enough to tip work station.
Always ensure the workpiece is well supported.
9. Never stand on this product.
10. Only use the work station for its prescribed purpose. Any use other than those mentioned in these
instructions will be considered misuse.
The manufacturer shall not be liable for any damage or injury resulting from such cases of misuse.
11. The use of any accessories other than those recommended in the instruction manual may present a risk of
personal injury.
Den otes risk of personal injury or damage to the tool.
Wear gloves.
Read manual before use.
Wear ear guards and goggles.
Dispose packaging and appliance in an environmentally- friendly way!