EN
WWW.BORMANNTOOLS.COM
4
Charging Cell Phone or Tablet Instruction:
1. Plug the USB cable to the USB output port.
2. Select appropriate connector for your cell phone
or tablet.
The indicators will be on when the device is charging.
3. Press the switch button to charge.
Power Supply for 12V Vehicle Products or 12V Electronics
1. Plug the optional switch cable into12V/10Aoutput port.
2. Connect the optional switch cable and 12V vehicle product or 12V electronics.
3. Press the switch button to supply power.
LED Flash Light
Press the switch for 3 seconds to switch on the LED flash light.
There are 3 modes for LED light appear in order (illumination, strobe, SOS) if you press slightly.
C. Technical Data
Size:
225*90*30mm
Weight:
680g
Battery Capacity:
18000mAh
Input:
14V/1A
Output:
5V/2.1A, 5V/1A, 12V/10A, 19V/3.5A, 12V jump start
Full Charging
Time:
Approx. 6h
Start Current:
350A
Peak Current:
700A
Operation Temp.:
-20⁰C
~
60
0C / - 4
0
F
~
1400 F
Protections:
Short circuit proof, over charge protection and discharge protection
Lifetime:
>1000 Cycles
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif-
icantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
