12
WARNING! Wear eye protection! Air blast can cause debris and dust to
be blown back towards you.
3.4 Inflation gun
Use
Method of use
Recommended pressure
Inflation Connect the compressed air supply to
fitting C. Connect the inflation fitting D to
the valve of the wheel and check the
pressure on gauge E. Press the trigger to
inflate and keep checking the pressure on
the gauge: if the pressure is too high, push
button F to restore the correct pressure.
4 bar
4. MAINTENANCE
4.1 Spray gun
Pour remaining paint into another container and then clean paint passage
and air cap. Spray a small amount of thinner to clean passage. Incomplete
cleaning will result the spray pattern to be un
-
sharp and small particles may
be in the product sprayed. Clean fully and promptly two
-
component paint
after using.
Clean other sections with supplied brush soaked
in
thinner and/or
with soft clothes.
Clean paint passages fully before disassembly.
Remove fluid nozzle after removing fluid needle set or wile keeping f
luid needle pulled,
in
order to protect seat.
CAUTION: Never use
a
wire or other hard thing to dig nozzle, fluid needle, this will
cause damage. Never immerse spray gun completely
in
thinner or solvent. When
reassembly, always clean parts to prevent the sticking of dust.
Summary of Contents for 001645
