background image

BORLA PERFORMANCE INDUSTRIES 

TITLE: 2009-2010 Volkswagen Jetta TDI 
Sedan and Sport Wagon TDI Installation 
Instructions  (pn-140317) 

PART NO. A-35503                      Rev. 1 

Page 2 of 4 

 

 

Minimum Required Tool List:  

 
 

TOOLS: 

 

1  3/8” Drive Ratchet 
2  3/8” Drive Extension 3” 
3  13mm Socket 
4  Metal cutting sawsall 
5    Pry Bar 
 

 

SHOP SUPPLIES:

 

 
1  Spray Lubricant      
 

Borla Performance Cat-Back™ Bill of Materials 

 
 

 
 
 

 
 
 

 
 

 

 
 

 
 

 
 
 
 
 
 

 
1.  Front pipe assembly 
2.  Tail Pipe assembly 
3.  2.50” clamp (qty 1) 

Summary of Contents for 140317

Page 1: ...installing your Borla Performance Exhaust System you indicate that you have read this document and you agree with the terms stated below It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your Borla Performance Exhaust System Borla Performance Industries assumes no responsibility for damages occurring from misuse abuse im...

Page 2: ...ns pn 140317 PART NO A 35503 Rev 1 Page 2 of 4 Minimum Required Tool List TOOLS 1 3 8 Drive Ratchet 2 3 8 Drive Extension 3 3 13mm Socket 4 Metal cutting sawsall 5 Pry Bar SHOP SUPPLIES 1 Spray Lubricant Borla Performance Cat Back Bill of Materials 1 Front pipe assembly 2 Tail Pipe assembly 3 2 50 clamp qty 1 1 2 3 ...

Page 3: ...m Original Exhaust System Removal Note With a used vehicle we suggest a penetrating spray lubricant to be applied liberally to all exhaust fasteners and allowing a significant period of time for the chemical to lubricate the threads before attempting to disassemble 1 The OE exhaust cannot be removed without cutting the pipe above the rear axel area Cut pipe as indicated using a metal cutting blade...

Page 4: ...locking notches creating a proper seal The pipe will distort or ovalize in shape if the clamp bolt is positioned over the notches 4 Check your exhaust system for proper clearance under the vehicle and also for tip alignment Figure 7 Once position has been determined to be correct tighten the Accuseal clamp 32 35 ft lbs Tighten the OE clamp bolts 5 Before starting your vehicle make sure to check al...

Reviews: